Case Studies / Vax Commercial

Energy Efficient Electrical Appliances

When the EU changed the rules on vacuum cleaner energy efficiency in 2013, every manufacturer in the category had to redesign their products. Vax Commercial saw it coming and decided to turn a compliance headache into a competitive advantage. In 18 months, working from concept to mass production in South East Asia, that’s exactly what happened.

Orange vacuum cleaner bodies on a factory production line
Duration
18 Months
Stages
Concept to Mass Production in South-East Asia
Basis
In-House Design Engineer

01 / Brief

The Challenge

Vacuum cleaners used to be sold on the premise that the higher the motor wattage, the better the machine. The reality is that these machines were inefficient and noisy.

In 2013, the EU introduced eco-design energy labelling to this product category, capping motor power at 900W and assessing everything from noise and emissions to dust pickup and annual energy consumption.

Every manufacturer in the category had to respond. Vax Commercial saw it as an opportunity to take the lead.

02 / Work

Responsibilities

My brief was to take an existing product and make it category leading under the new regulations, without changing how it looked. That meant a complete internal redesign of the air paths, motor, floor tool and filtration, while keeping the external surfaces untouched.

Once the first machine was proven, I travelled to China to prepare the manufacturer for what was coming. Tooling trials, trial builds, compliance education and setting up end of line testing. The learnings from that first machine then formed the foundation for an entire family of products.

03 / Build

Project Image Gallery

  1. VCC-08A and VCC-15 eco labels
    Fig. 01 of 11VCC-08A and VCC-15 eco labels
  2. Prototype thermocouple testing
    Fig. 02 of 11Prototype thermocouple testing
  3. Exhaust HEPA cartridge filter prototype
    Fig. 03 of 11Exhaust HEPA cartridge filter prototype
  4. VCC-08A T0 tooling trial inspections
    Fig. 04 of 11VCC-08A T0 tooling trial inspections
  5. VCC-08A Engineering build
    Fig. 05 of 11VCC-08A Engineering build
  6. Setting up end-of-line test equipment in China
    Fig. 06 of 11Setting up end-of-line test equipment in China
  7. VCC-08A Promotional material
    Fig. 07 of 11VCC-08A Promotional material
  8. VCC-15 Tool storage & cable tidy development
    Fig. 08 of 11VCC-15 Tool storage & cable tidy development
  9. VCC-15 Pilot production builds
    Fig. 09 of 11VCC-15 Pilot production builds
  10. VCC-15 Drum T0 injection tooling trials
    Fig. 10 of 11VCC-15 Drum T0 injection tooling trials
  11. ISSA Interclean 2014 Show Prototype
    Fig. 11 of 11ISSA Interclean 2014 Show Prototype

04 / Outcome

The Result

Both launch products achieved an overall A rating, a category leading position at the time. The larger of the two outperformed the prior market leader on five of the six assessed criteria.

In total, five machines were taken from concept to production ready across the 18 month programme, each built on the learnings of the last.

Contact

Ready to take the next step?

Tell me about your project and I’ll get back to you within one working day.

Book a call
Free introduction call
30 minutes on Teams »