Case Studies / PiperMoto J1 Super Scooter

Desirable Micro Mobility

John Piper spent 40 years in motorsport designing F1 cars, Le Mans racers and land speed record vehicles. His next project was a scooter. Not just any scooter, but a 690cc, 67 horsepower super scooter that would go on to top Bike EXIF’s most popular bikes of 2023. I was brought in for six weeks to solve the cooling system.

Side view of the PiperMoto J1 electric blue super scooter
Duration
6 Weeks
Stages
Ideation to Prototype
Basis
Freelance Project

01 / Brief

The Challenge

The J1 uses a 690cc engine from a KTM Duke as its donor powerplant. That engine was designed to be cooled in a very different vehicle with very different packaging constraints. The challenge was to design a custom cooling system that worked within the J1’s unique geometry while maintaining equivalent thermal performance to the original.

02 / Work

Responsibilities

Working in Solidworks, I designed the complete cooling system layout, including radiators, hoses and expansion tank, within the tight packaging constraints of the J1’s custom chassis. A key requirement was matching the equivalent coolant system length of the donor KTM to maintain consistent thermal behaviour. The resulting CAD files were used directly to produce the prototype parts for the homologation build.

03 / Build

Project Image Gallery

  1. The J1 in full CAD overview
    Fig. 01 of 6The J1 in full CAD overview
  2. Coolant hose routing ideation and research
    Fig. 02 of 6Coolant hose routing ideation and research
  3. Automotive 3D packaging layout design completed in Solidworks
    Fig. 03 of 6Automotive 3D packaging layout design completed in Solidworks
  4. Overview of the scooter’s complete cooling system in 3D CAD
    Fig. 04 of 6Overview of the scooter’s complete cooling system in 3D CAD
  5. Prototype mock-up on the scooter’s bare chassis
    Fig. 05 of 6Prototype mock-up on the scooter’s bare chassis
  6. Homologation prototype vehicle with the cooling system fitted
    Fig. 06 of 6Homologation prototype vehicle with the cooling system fitted

04 / Outcome

The Result

The cooling system was delivered within the six week brief and integrated successfully into the homologation prototype. That vehicle went on to debut at the Bike Shed custom motorcycle show in 2023, top Bike EXIF’s annual chart and generate coverage across the global motoring press. Not bad for a scooter…

Contact

Ready to take the next step?

Tell me about your project and I’ll get back to you within one working day.

Book a call
Free introduction call
30 minutes on Teams »